View B10_133882.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

B10 RF Relays
Ball Grid Array Relays Coto's Ball Grid Array (BGA) construction offers a breakthrough in reed relay performance. This patented technology1 allows for shorter RF paths in a controlled 50 environment to minimize signal attentuation. The designer is now able to switch or pass signals with wider bandwidth and faster rise time than alternative technologies. This is particularly important in Mixed Signal IC testers. BGA packaging allows relays to be integrated easily on boards designed for surface mount processing. Series Features BGA Surface Mount Ability to pass GHz signals Rise time < 40Sec 50 Characteristic Impedance Low Capacitance Patented Design1 Applications IC Testers In-Line Relay Testers Memory Testers Mixed Signal Testers High Bandpass Applications
Dimensions in Inches (Millimeters)
Notes:
1
Protected by one or more of the following US Patents: 6025768, 6052045, 6294971,
6683518, RE38381 and other foreign patents.
40
COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920
6
(Europe) Tel: +31-45-5439343 / Fax +31-45-5427216
B10 RF Relays
Test Parameters
Coil Resistance Nominal Voltage Must Operate Voltage Must Release Voltage Coil Resistance Nominal Voltage Must Operate Voltage Must Release Voltage Switching Voltage Switching Current Carry Current (Continuous) Contact Rating (Resistive Load) 3 Life Expectancy Signal Switching 3 Resistive Load Other Load Conditions3 Static Contact Resistance (initial) Dynamic Contact Resistance (initial) Insulation Res All Isolated Pins Capacitance Across Contacts Capacitance Open Contact to Coil Capacitance Closed Contact to Coil Across Contacts Dielectric Contact to Coil Strength Contact to Shield Operate Time (including bounce) Release Time (Si diode damped) 4 RF Insertion Loss Signal Rise Time (10% - 90%)
Conditions
3.3V Coil
1,2
Min
49.5
B10 Typ
55.0 5.0
Max
60.5 4.0 2.4 165.0 6.0 3.8 125 0.25 0.5 3.0
Units
Volts DC Volts DC Volts DC Volts DC Volts DC Volts DC Volts Amps Amps Watts 6 x 10 Ops x 106 Ops pF pF pF V (DC/Pk AC) V (DC/Pk AC) V (DC/Pk AC) Sec Sec GHz pSec
0.4 135.0 5V Coil 0.4 Max DC/Peak AC Switch and Shield Resistive Load 1VDC / 10mA 12VDC / 10mA Consult Factory 0.05VDC / 10mA 0.5V / 50mA 100 Hz, 1.5 mSec 100VDC Shield Guarding Shield Guarding Shield Guarding 100 A 100 A 100 A Nominal Voltage coil drive @ 30 Hz, square wave -3 dB roll-off frequency Corrected for measurement system response time
150.0 5.0
1000 1 0.125 0.150 10!10 10 12 0.2 0.5 1
150 1500 1500 100 30 10.0 40 200 50
NOTES:
1
All parameters specified per EIA/NARM standards for dry reed relays, # RS-421 and RS-436, if a suitable parametric standard exists. 2 Unless otherwise noted, all parameters are specified at 25C and 40% RH. 3 Life expectancies based on characteristic life (63.2% failure) calculated from the 2-parameter Weibull distribution. Contact resistance >2.0 defines end of life. 4 Frequency at which the difference between output and input signal amplitude exceeds -3dB. (Direct wired using 50 coaxial cable.)
ENVIRONMENTAL RATINGS: Storage Temperature: -35C to +100C. Operating Temperature: -20C to +85C.
Vibration: sinusoidal vibration with an amplitude of 10G over a 10Hz to 2000Hz frequency range shall not cause a closed channel activated at the nominal coil voltage to open, not an open channel to close. Max Soldering Temperature: 226C (438F) max for 1 minute dwell time. Temperature measured at a relay ball termination.
6 E-mail: info@cotorelay.com
For Most Recent Data, Consult the Coto Technology Website: www.cotorelay.com
41

▲Up To Search▲

Price & Availability of B10

	To Download B10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .